Posts Tagged Teardown
The Atten APS 3003S/3005S is an entry-level power supply designed for use by hobbyist and by students in school labs. The two models, the APS3003S and APS 3005S are almost exactly the same, but there are slight design differences and specs between the pair. The 3003S features a maximum current output of 3A and the fan is constantly on. The 3005S model features a maximum current output of 5A and the fan is controlled by a thermostat, which monitors the temperatures of the heat sinks from the two power transistors and discussed later on. This series of power supplies is usually seen sold on eBay for a relatively cheap and fair price of around about $100, which means that it is easily obtainable for both hobbyist and school use. It can output 30 Volts at 3 or 5 Amps depending on the model and it does also have some very promising specs. Every lab needs a proper power supply for many purposes such as testing electronic circuits, charging batteries and for just burning things up :D. I’ve been needing a proper power supply for my lab for a while now and after searching for a bit I decided to buy this power supply because I was unable to find another power supply in the same price range with the specs that this unit offered. Now after receiving and using the power supply for a bit, I am able to provide a full review and a small teardown of the supply.
Recently I have been in need for a proper power supply as I have been tired of using the LM317 power supply that I first made. After a lot of research and searching I have finally made the decision to buy a cheap power supply just for the moment, while I am still trying out very simple circuits which do not require a specialised power supply for them. My choice of power supply finished at the Atten 3003S. Since I already have another Atten product – The 858D+ hot air rework station (as seen in the background of the image below) and I because I was very pleased with the construction and the quality I decided to go along and order the power supply. The price for the 3003S is just under $100 which is a perfect price for an electronics hobbyist. The power supply took about 3 days to order since it was coming from an Australian seller (eBay seller “carmates”) and not from overseas. Upon receiving the product I was very surprised that they shipped it in the original box instead of putting in into another box for protection. Luckily the power supply survived the journey and was received in excellent condition.
I recently acquired a Sony Vaio VGN-SZ Series laptop computer from a friend who said it was overheating too much. The computer is 4 years old as it was released in 2008. The specs on the computer are very nice with 2GB RAM, a 2.00Ghz Intel processor and NVIDIA GeForce 7400 graphics. This is an excellent laptop for carrying around as a work laptop as it has a nice and sleek shape for its age. You could probably already work out from the image below that this laptop has already gone through quite a beating with the sides gone and the keyboard just holding on with its last few notches…
Some people like to use the iPad onscreen keyboard, while others find it easier to use a separate more “physical” keyboard. I was very lucky to obtain a Rappo BT Ultra-slim Keyboard for iPad E6300
, but also very unlucky to be able to use it only for a few days before its obvious flaws came out. So today we have a review and teardown of this wireless keyboard which made for iPad, can also be used for a Mac computer. Below is an overview on the keyboard.
You know those really cheap $4 multimeters that you see on eBay and Amazon all the time?
Being myself, I couldn’t resist and I had to buy one! So just a few days ago it came in from the post and I gotta admit that it took it an awful long amount of time to get here, almost 3 weeks! Besides that the thing came in a padded envelope and even with that the box was still a bit crunched up, but the multimeter was safe!
My impressions will this whole thing was a big roller coaster, but lets start from the beginning. First impressions, the packaging was fairly cheap and the box looked like it had been through a big journey. The instruction manual was surprisingly well written for such a cheap multimeter and the multimeter and probes felt very solid and quality.